Trusted Roofer In Crawley

Crawley sits in the West Sussex Weald just south of the M25, on largely clay soils. Roofs here face the typical Wealden mix: wet winters drive water through any weak point in flashing or pointing, and autumn leaf fall blocks gutters and valleys quickly in older residential areas. Wind exposure is moderate but post-war and modern estate housing with shallower roof pitches takes wind load differently from traditional pitched roofs. Frost damage to cracked pointing on older properties is the main winter risk. Salt-related corrosion is not a factor this far inland.

Yes. Crawley has multiple conservation areas, including the older parts of Three Bridges, Ifield, Worth and the historic High Street, with listed buildings throughout the older parishes. Conservation area rules and listed building consent are the homeowner’s responsibility and can restrict roof shape, slope, tile material and rooflight placement. We recommend checking with Crawley Borough Council’s planning team before any roof work begins, and we will work to whatever specification the council approves.

Crawley’s housing stock is dominated by post-war New Town development with shallow-pitched concrete interlocking tile roofs across the neighbourhoods. The older village cores at Ifield, Worth and Three Bridges retain timber-framed and tile-hung Wealden cottages with clay-tile or peg-tile roofs. Modern estate and apartment developments use a mix of concrete tile pitched and hot melt or EPDM flat systems. Each comes with a different maintenance pattern.

After a strong westerly or south-westerly blow, look for slipped, cracked or missing tiles, dislodged ridge or hip tiles, fallen branches across roof slopes, leaf-fall and debris blocking valleys and gutters, and damp patches on top-floor ceilings or chimney breasts. Slipped concrete interlocking tiles on shallow-pitched New Town roofs are a particularly common Crawley storm casualty. If you spot anything, get it covered or assessed before the next weather front arrives.

Yes. We carry full public liability and employer’s liability insurance for every project we take on, and we can provide a current certificate on request before work starts.

Warranties depend on the roof system and the material used. Most pitched roof installations come with a workmanship warranty from us and a separate manufacturer’s warranty on the tiles, slates or membrane. We confirm the exact warranty terms in writing as part of your quote so you know what’s covered before any work begins.

Pitched roofs sit at an angle so rain runs off naturally, suit traditional tile or slate finishes, and tend to last longest on UK homes. Flat roofs are level or near-level, are usually finished in hot melt, EPDM or felt, and are most common on extensions, garages, dormers and some modern builds. Each needs a different approach to drainage, insulation and inspection.

A professional inspection once a year is a sensible baseline for any UK roof, with an extra check after any major storm or unusually heavy rain. Catching slipped tiles, blocked valleys or weakening flashing early is almost always cheaper than dealing with the water damage that follows.

For safety reasons we would always recommend calling a professional. Working at height on a wet roof is one of the most common causes of serious DIY injury in the UK, and the source of a leak is rarely where the water shows up indoors. A proper diagnosis usually saves money in the long run and stops the same problem returning the next time it rains.

Yes. We install sedum and biodiverse green roofs on suitable flat or low-pitch structures, and we work with recycled-content membranes, FSC-certified timber and salvageable slate or tile where possible. Green roofs add insulation, slow rainwater run-off and can support local biodiversity, which makes them a strong fit for urban roofing projects.