Trusted Roofer In West Sussex

West Sussex covers everything from the south-facing coast at Bognor Regis, Worthing and Littlehampton to the South Downs ridge and the Low Weald around Horsham and Crawley. Coastal areas see salt-laden air, south-westerly Channel gales and faster corrosion of metal flashing and fixings. Downland villages see wind exposure and harder frost than the coast. Wealden inland areas see wet winters, heavy clay soils, autumn leaf fall and storm-fallen branches. Roof specifications need to follow each location’s exposure.

Yes. West Sussex has hundreds of conservation areas spread across its seven district and borough councils, including Arun, Chichester, Worthing, Adur, Horsham, Mid Sussex and Crawley. Many also fall within the South Downs National Park. Listed building consent and planning consent are the homeowner’s responsibility and depend on the relevant district council and, where applicable, the South Downs National Park Authority. We recommend checking with the right local council before any roof work begins, and we will work to whatever specification they approve.

West Sussex housing stock varies sharply by area. Coastal towns (Bognor Regis, Worthing, Littlehampton, Shoreham-by-Sea) have Victorian and Edwardian seafront terraces with natural-slate roofs, plus modern apartment blocks. The South Downs villages have flint and brick cottages with clay tile or peg tile. The Weald (Horsham, Pulborough, Rudgwick) has timber-framed and tile-hung cottages plus distinctive horsham slab roofs on some historic properties. New Town Crawley is dominated by post-war concrete interlocking tile estates. Each requires a different approach.

After a strong south-westerly blow across West Sussex, look for slipped, cracked or missing slates and tiles, dislodged ridge or hip tiles, debris in valley gutters and parapet boxes, and damp patches on top-floor ceilings or chimney breasts. Coastal properties also need a check on salt-corroded fixings around lead flashing. Wealden properties need a check for storm-fallen tree limbs. If you spot anything, get it covered or assessed before the next weather front arrives.

Yes. We carry full public liability and employer’s liability insurance for every project we take on, and we can provide a current certificate on request before work starts.

Warranties depend on the roof system and the material used. Most pitched roof installations come with a workmanship warranty from us and a separate manufacturer’s warranty on the tiles, slates or membrane. We confirm the exact warranty terms in writing as part of your quote so you know what’s covered before any work begins.

Pitched roofs sit at an angle so rain runs off naturally, suit traditional tile or slate finishes, and tend to last longest on UK homes. Flat roofs are level or near-level, are usually finished in hot melt, EPDM or felt, and are most common on extensions, garages, dormers and some modern builds. Each needs a different approach to drainage, insulation and inspection.

A professional inspection once a year is a sensible baseline for any UK roof, with an extra check after any major storm or unusually heavy rain. Catching slipped tiles, blocked valleys or weakening flashing early is almost always cheaper than dealing with the water damage that follows.

For safety reasons we would always recommend calling a professional. Working at height on a wet roof is one of the most common causes of serious DIY injury in the UK, and the source of a leak is rarely where the water shows up indoors. A proper diagnosis usually saves money in the long run and stops the same problem returning the next time it rains.

Yes. We install sedum and biodiverse green roofs on suitable flat or low-pitch structures, and we work with recycled-content membranes, FSC-certified timber and salvageable slate or tile where possible. Green roofs add insulation, slow rainwater run-off and can support local biodiversity, which makes them a strong fit for urban roofing projects.