Trusted Roofer In Worthing

Worthing sits on the south-facing West Sussex coast immediately west of Brighton and Hove. Salt-laden air corrodes metal flashing, fixings and untreated lead faster than further inland, and south-westerly autumn gales come straight in off the open Channel, testing ridge tiles, slate clips and chimney pointing hard. Long humid spells in summer drive moss and algae growth on shaded north-facing slopes. The town’s South Downs backdrop offers no wind shelter from the coast. We specify marine-grade fixings and account for the corrosive coastal environment on every Worthing job.

Yes. Worthing has more than 20 conservation areas, including the seafront, Montague Street, Heene, Broadwater and several historic streets, with listed buildings throughout. Some have Article 4 Directions that can restrict roof shape, slope, tile material and rooflight placement. Planning consent and listed building consent are the homeowner’s responsibility. We recommend checking with Worthing Borough Council’s planning team before any roof work begins, and we will work to whatever specification the council approves.

Worthing’s housing stock is a real mix. The seafront has Regency and Victorian terraces with natural-slate pitched roofs and lead-lined parapet box gutters. Victorian and Edwardian terraces spread across the town with natural-slate or clay-tile roofs. Inter-war semis and detached villas use clay tile. Newer estates use concrete interlocking tiles, with hot melt or EPDM on flat extensions, garages, dormers and apartment blocks. Marine-grade fixings are standard. Each comes with a different maintenance pattern.

After a strong southerly or south-westerly off the Channel, look for slipped, cracked or missing slates and tiles, dislodged ridge or hip tiles, debris in valley gutters and parapet boxes, and damp patches on top-floor ceilings or chimney breasts. Salt-corroded fixings on older lead flashing are a particular vulnerability on Worthing seafront properties. If you spot anything, get it covered or assessed before the next weather front arrives.

Yes. We carry full public liability and employer’s liability insurance for every project we take on, and we can provide a current certificate on request before work starts.

Warranties depend on the roof system and the material used. Most pitched roof installations come with a workmanship warranty from us and a separate manufacturer’s warranty on the tiles, slates or membrane. We confirm the exact warranty terms in writing as part of your quote so you know what’s covered before any work begins.

Pitched roofs sit at an angle so rain runs off naturally, suit traditional tile or slate finishes, and tend to last longest on UK homes. Flat roofs are level or near-level, are usually finished in hot melt, EPDM or felt, and are most common on extensions, garages, dormers and some modern builds. Each needs a different approach to drainage, insulation and inspection.

A professional inspection once a year is a sensible baseline for any UK roof, with an extra check after any major storm or unusually heavy rain. Catching slipped tiles, blocked valleys or weakening flashing early is almost always cheaper than dealing with the water damage that follows.

For safety reasons we would always recommend calling a professional. Working at height on a wet roof is one of the most common causes of serious DIY injury in the UK, and the source of a leak is rarely where the water shows up indoors. A proper diagnosis usually saves money in the long run and stops the same problem returning the next time it rains.

Yes. We install sedum and biodiverse green roofs on suitable flat or low-pitch structures, and we work with recycled-content membranes, FSC-certified timber and salvageable slate or tile where possible. Green roofs add insulation, slow rainwater run-off and can support local biodiversity, which makes them a strong fit for urban roofing projects.