Trusted Roofer In Chichester

Chichester sits on the flat coastal plain of West Sussex, a few miles inland from Chichester Harbour and the Channel. Salt-laden air still reaches the city on south-westerly winds and accelerates corrosion on metal flashing, fixings and untreated lead. South-westerly autumn gales sweep across the flat plain with little to break them and test ridge tiles, slate clips and chimney pointing on exposed properties. The South Downs to the north offer no shelter from coastal winds. Long humid spells drive moss growth on shaded slopes.

Yes. Chichester has multiple conservation areas covering most of the historic walled city, including the four Quadrants, Pallant area and several historic streets, with one of the highest concentrations of listed buildings in West Sussex including the cathedral. Conservation area rules and listed building consent are the homeowner’s responsibility and can restrict roof shape, slope, tile material and rooflight placement. We recommend checking with Chichester District Council’s planning team before any roof work begins, and we will work to whatever specification the council approves.

Chichester’s housing stock is varied. The walled city has Georgian and Victorian townhouses with natural-slate pitched roofs and lead-lined parapet gutters, plus medieval and timber-framed buildings with clay tile or peg tile. Edwardian and inter-war housing across the wider city typically uses clay tile. Newer estates around the city edges use concrete interlocking tiles, with hot melt or EPDM on flat extensions. Many older roofs need careful tile matching when replaced. Each comes with a different maintenance pattern.

After a strong south-westerly across the coastal plain, look for slipped, cracked or missing slates and tiles, dislodged ridge or hip tiles, debris in valley gutters and parapet boxes, and damp patches on top-floor ceilings or chimney breasts. Lifted lead flashing around chimneys and tall Georgian parapets is a common storm casualty on older Chichester townhouses. If you spot anything, get it covered or assessed before the next weather front arrives.

Yes. We carry full public liability and employer’s liability insurance for every project we take on, and we can provide a current certificate on request before work starts.

Warranties depend on the roof system and the material used. Most pitched roof installations come with a workmanship warranty from us and a separate manufacturer’s warranty on the tiles, slates or membrane. We confirm the exact warranty terms in writing as part of your quote so you know what’s covered before any work begins.

Pitched roofs sit at an angle so rain runs off naturally, suit traditional tile or slate finishes, and tend to last longest on UK homes. Flat roofs are level or near-level, are usually finished in hot melt, EPDM or felt, and are most common on extensions, garages, dormers and some modern builds. Each needs a different approach to drainage, insulation and inspection.

A professional inspection once a year is a sensible baseline for any UK roof, with an extra check after any major storm or unusually heavy rain. Catching slipped tiles, blocked valleys or weakening flashing early is almost always cheaper than dealing with the water damage that follows.

For safety reasons we would always recommend calling a professional. Working at height on a wet roof is one of the most common causes of serious DIY injury in the UK, and the source of a leak is rarely where the water shows up indoors. A proper diagnosis usually saves money in the long run and stops the same problem returning the next time it rains.

Yes. We install sedum and biodiverse green roofs on suitable flat or low-pitch structures, and we work with recycled-content membranes, FSC-certified timber and salvageable slate or tile where possible. Green roofs add insulation, slow rainwater run-off and can support local biodiversity, which makes them a strong fit for urban roofing projects.