Trusted Roofer In Jevington

Jevington sits in a downland combe on the South Downs in East Sussex, between Polegate and Eastbourne. The village is sheltered by the surrounding chalk slopes but the rooflines themselves are exposed: westerly and south-westerly autumn gales sweep across the open Downs and test ridge tiles, slate clips and chimney pointing on hilltop and ridge-line properties. The village’s elevated position also means harder frost than the coast below. Salt-related corrosion is a minor factor at most this far inland.

Yes. Jevington sits within the South Downs National Park and has a designated conservation area covering the historic village core, with listed buildings throughout including the Anglo-Saxon church. Conservation area rules and listed building consent are the homeowner’s responsibility, and the South Downs National Park Authority adds another planning layer. We recommend checking with Wealden District Council and the South Downs National Park Authority before any roof work begins, and we will work to whatever specification they approve.

Jevington’s older housing is the classic Downland mix: flint and brick cottages with clay-tile or peg-tile pitched roofs, plus tile-hung farmhouses. Many older roofs use heavy clay peg tiles that need careful matching when replaced. There is very little modern infill given the National Park designation, so most properties carry pitched clay tile or natural slate. Flat roofs on extensions and outbuildings are usually hot melt or EPDM. Each comes with a different maintenance pattern.

After a strong westerly or south-westerly across the open Downs, look for slipped, cracked or missing tiles, dislodged ridge or hip tiles, debris in valley gutters, and damp patches on top-floor ceilings or chimney breasts. Lifted lead flashing around chimneys is a common storm casualty on older Jevington properties. If you spot anything, get it covered or assessed before the next weather front arrives.

Yes. We carry full public liability and employer’s liability insurance for every project we take on, and we can provide a current certificate on request before work starts.

Warranties depend on the roof system and the material used. Most pitched roof installations come with a workmanship warranty from us and a separate manufacturer’s warranty on the tiles, slates or membrane. We confirm the exact warranty terms in writing as part of your quote so you know what’s covered before any work begins.

Pitched roofs sit at an angle so rain runs off naturally, suit traditional tile or slate finishes, and tend to last longest on UK homes. Flat roofs are level or near-level, are usually finished in hot melt, EPDM or felt, and are most common on extensions, garages, dormers and some modern builds. Each needs a different approach to drainage, insulation and inspection.

A professional inspection once a year is a sensible baseline for any UK roof, with an extra check after any major storm or unusually heavy rain. Catching slipped tiles, blocked valleys or weakening flashing early is almost always cheaper than dealing with the water damage that follows.

For safety reasons we would always recommend calling a professional. Working at height on a wet roof is one of the most common causes of serious DIY injury in the UK, and the source of a leak is rarely where the water shows up indoors. A proper diagnosis usually saves money in the long run and stops the same problem returning the next time it rains.

Yes. We install sedum and biodiverse green roofs on suitable flat or low-pitch structures, and we work with recycled-content membranes, FSC-certified timber and salvageable slate or tile where possible. Green roofs add insulation, slow rainwater run-off and can support local biodiversity, which makes them a strong fit for urban roofing projects.