Trusted Roofer In Pulborough

Pulborough sits in the Arun Valley between the South Downs and the Low Weald in West Sussex. Roofs here see a mix of valley and Wealden pressures. Westerly and south-westerly autumn gales funnel up the valley and test ridge tiles, slate clips and chimney pointing on exposed properties. The river setting brings additional damp on north-facing slopes, and heavy tree cover in the surrounding farmland means autumn leaf fall blocks gutters and valleys quickly. Frost damage to cracked pointing is the main winter risk. Salt-related corrosion is not a factor this far inland.

Yes. Pulborough has a designated conservation area covering the historic core around the High Street and Lower Street, with listed buildings throughout, and sits close to the South Downs National Park. Conservation area rules and listed building consent are the homeowner’s responsibility and can restrict roof shape, slope, tile material and rooflight placement. We recommend checking with Horsham District Council’s planning team before any roof work begins, and we will work to whatever specification the council approves.

Pulborough’s older housing includes timber-framed and tile-hung cottages along the older streets, with clay-tile or peg-tile pitched roofs. Victorian and Edwardian villas across the wider village use natural-slate or clay-tile pitched roofs. Newer estate housing along the village edges and modern infill use concrete interlocking tiles, with hot melt or EPDM on flat extensions and garages. Several older properties carry heavy clay peg tiles that need careful matching when replaced. Each comes with a different maintenance pattern.

After a strong westerly or south-westerly up the Arun Valley, look for slipped, cracked or missing tiles, dislodged ridge or hip tiles, fallen branches across roof slopes, leaf-fall and debris blocking valleys and gutters, and damp patches on top-floor ceilings or chimney breasts. Lifted lead flashing around chimneys is common on older Pulborough properties after a strong blow. If you spot anything, get it covered or assessed before the next weather front arrives.

Yes. We carry full public liability and employer’s liability insurance for every project we take on, and we can provide a current certificate on request before work starts.

Warranties depend on the roof system and the material used. Most pitched roof installations come with a workmanship warranty from us and a separate manufacturer’s warranty on the tiles, slates or membrane. We confirm the exact warranty terms in writing as part of your quote so you know what’s covered before any work begins.

Pitched roofs sit at an angle so rain runs off naturally, suit traditional tile or slate finishes, and tend to last longest on UK homes. Flat roofs are level or near-level, are usually finished in hot melt, EPDM or felt, and are most common on extensions, garages, dormers and some modern builds. Each needs a different approach to drainage, insulation and inspection.

A professional inspection once a year is a sensible baseline for any UK roof, with an extra check after any major storm or unusually heavy rain. Catching slipped tiles, blocked valleys or weakening flashing early is almost always cheaper than dealing with the water damage that follows.

For safety reasons we would always recommend calling a professional. Working at height on a wet roof is one of the most common causes of serious DIY injury in the UK, and the source of a leak is rarely where the water shows up indoors. A proper diagnosis usually saves money in the long run and stops the same problem returning the next time it rains.

Yes. We install sedum and biodiverse green roofs on suitable flat or low-pitch structures, and we work with recycled-content membranes, FSC-certified timber and salvageable slate or tile where possible. Green roofs add insulation, slow rainwater run-off and can support local biodiversity, which makes them a strong fit for urban roofing projects.